Table of Contents Table of Contents
Previous Page  315-Cargo and Hazardous Materials / 748 Next Page
Information
Show Menu
Previous Page 315-Cargo and Hazardous Materials / 748 Next Page
Page Background

Car

g

o and

H

a

z

ardous Materials

BOS-PRD-03.900601

x

Tanks which have contained Zinc Bromide

shall

be drained as much as possible prior to washing;

x

If a vessel’s cargo pump cannot remove all but the smallest amount of brine, then consideration

shall

be given to the use of portable pumps to ensure as little residue as possible remains;

x

Tank cleaning and the discharge of tank washings can only be carried out under the surveillance of

an approved MARPOL Surveyor, as the tank washings are classed as special waste.

4

.

4

.

3 B

rine (

N

aCl

,

KCl

,

CaCl

,

Ca

B

r)

Brine, generally, has a hazard category of Xi – irritant. Contact with the skin or eyes

shall

be avoided and

vapours, fumes, spray or gas

shall

not be inhaled.

Calcium Bromide (CaBr) and fluids containing Bromides are extremely harmful when they make contact with

the skin or eyes.

NaCl, KCl, CaCl based Brines are considered to be of low/medium risk.

Brine is non-flammable with a non-determined flash point.

The

Control of Substances Hazardous to Health (COSHH) Regulations

assessment and

MSDS shall

always

be consulted.

Proper and correct PPE

shall

be worn at all times when working with Bromide based fluids.

4

.

4

.

4 B

ase

O

il

Base Oil flash points range from >65 degrees C with an auto ignition range of >230 degrees C and

shall

be

shielded/protected from all ignition sources.

The

COSHH

advice and

MSDS shall

always be consulted.

Base Oil has a hazard category of “Harmful”, with lung damage possible if swallowed.

Contact with skin and eyes

shall

be avoided and inhalation of vapour fumes or spray and gas is harmful and

will cause lung and respiratory damage.

Hand, eye and skin protection

shall

be in place and an approved respirator

shall

be used when entering any

confined space that has contained Base Oil.

4

.

4

.

5 O

il

B

ased Mud (

OB

M)

Oil Based Mud does not have a hazard category as such but each individual component has a hazard

category.

The flash point of Oil Based Mud is dependent on the base oil used but will be >65 degrees C° and

shall

be

shielded/protected from all ignition sources.

The

COSHH

assessment and

MSDS shall

always be consulted.

Nausea and headaches can occur if excessive exposure occurs.

Contact with skin and eyes

shall

be avoided as well as inhalation of vapour, fumes, spray or gas.

Hand, eye and skin protection

shall

be in place and an approved respirator utilised.

Version 04. Original date: 19/06/2012. Version date: 31/12/2014. Valid version only on QMS site. Uncontrolled document when printed.

Procedure prepared by: BOS Deputy QHSE Manager. Approved by: BOS QHSES Manager. Validated by: BOS Quality Representative

7 / 18

315